Download Print this page

Safety Of Others; After Use; Inspection And Repairs; Electrical Safety - Black & Decker FX810 User Manual

Hide thumbs

Advertisement

Table of Contents
• Never let the appliance operate
unattended.
• Never reach into the jar with your fingers
or an object while the appliance is
running.
• Only remove the jar after you have
switched the appliance o and any
moving parts have stopped.
• Do not touch the cutting blades.
• Keep any loose clothing or long hair
away from the feeding tube and any
moving parts.
• Care shall be taken when handling the
sharp cutting blades, emptying the bowl
and during cleaning.
• Do not immerse the appliance, cord set
or plug in liquids.
• Position the cord so it does not hang
over the edge of worktops & cannot be
caught accidentally or tripped over.
Caution: Ensure the Blender is turned o
before removing from the stand.

Safety of others

• This appliance is not intended for use by
persons (including children) with
reduced physical sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.

After use

• Remove the plug from the socket before
leaving the appliance unattended and
before changing, cleaning or inspecting
any parts of the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.

Inspection and repairs

• Switch off the appliance and disconnect
from the supply before cleaning,
changing accessories or approaching
parts which move in use
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may a ect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Do not use the appliance if the blade is
damaged.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt to
repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.

Electrical safety

Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This appliance is double insulated
in accordance with EN 60335-2-14;
therefore no earth wire is required.
ENGLISH
5

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Black & Decker FX810