Download Print this page

After Use; Inspection And Repairs; Electrical Safety - Black & Decker TS2000 Original Instructions Manual

Hide thumbs

Advertisement

• Do not allow children or animals
to come near the work area or to
touch the appliance or power
supply cord. Close supervision is
necessary when the appliance is
used near children.

After use

• Remove the plug from the socket
before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts
of the appliance.
• When not in use, the appliance
should be stored in a dry place.
Children should not have access
to stored appliances.

Inspection and repairs

• Before use, check the appliance
for damaged or defective parts.
Check for breakage of parts,
damage to switches and any
other conditions that may affect
its operation.
• Do not use the appliance if any
part is damaged or defective.
• Have any damaged or defective
parts repaired or replaced by an
authorised repair agent.
(Original instructions)
• Before use, check the power
supply cord for signs of damage,
ageing and wear.
• Do not use the appliance if the
power supply cord or mains plug
is damaged or defective.
• If the power supply cord or mains
plug is damaged or defective it
must be repaired by an
authorised repair agent in order
to avoid a hazard. Do not cut the
power supply cord and do not
attempt to repair it yourself.
• Never attempt to remove or
replace any parts other than
those specified in this manual.

Electrical safety

This product must be
earthed. Always check that
the power supply
corresponds to the voltage
on the rating plate.
If the supply cord is damaged, it
must be replaced by the
manufacturer or an authorised
Black & Decker Service Centre in
order to avoid a hazard.
ENGLISH
5

Advertisement

loading

  Also See for Black & Decker TS2000

This manual is also suitable for:

Ts2020