Mains Plug Replacement - Black & Decker FX810 User Manual

ENGLISH
• To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.
• Check that the supply voltage shown on
the rating plate of the appliance matches
that of your electrical system. Any
connection error will invalidate the
guarantee.

Mains plug replacement

If a new mains plug needs to be fitted:
• Safely dispose of the old plug
• Connect the brown lead to the live
terminal of the new plug
• Connect the blue lead to the neutral
terminal
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal.
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal
• Follow the fitting instructions supplied
with good quality plugs
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product.
Warning! The above section on mains plug
replacement is for authorized service centre
personnel.
Assembly
Wash all detachable parts (see
chapter 'Maintenance and
cleaning').
Assembling the food processor
1. Fit the food processor bowl (H) onto the
food processor base (I), secure it by
turning it clockwise.
6
2. For chopping or kneading fit the
required blade (E or F) onto the blade
holder (G).
3. For shredding or slicing, fit the required
blade (D1, D2, D3, D4 or D5) into the
cutter disc (D).
4. Place the assembled blade / cutter disc
into the food processor jug (H).
5. Fit the food processor lid (C) and secure
it by turning it clockwise
6. Fit the inner pusher (B) into the pusher
(A), then place the assembly into the
hole in the lid (C)
Assembling the blender
1. Place the blender jug (Q) onto the food
processor base (I) and secure it by
turning clockwise.
2. Fit the blender lid (R) to the blender jar
(Q) and secure it by turning it
anti-clockwise.
3. Fit the filler cap (S) to the blender lid (R)
and secure it by turning it clockwise.
Assembling the grinder
1. Fit the grinder jug seal (N) into the
grinder blade (M).
2. Fit the grinder blade (M) into the grinder
jar (0) and secure by turning it clockwise
3. Place the grinder jar onto the food
processor base (I) and secure it by
turning it clockwise
Assembling the citrus Juicer
1. Fit the food processor jug (H) onto the
food processor base (I), and secure it by
turning it clockwise
2. Fit the citrus juicer (P) onto the food
processor jug (H), and secure it by
turning it clockwise.