Installation For Parallel Printing By Plug And Play - Toshiba e-STUDIO 520 Printing Manual

2 Installing Client Software for Windows
10
The installation is completed.
Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.226 "Before Using the Printer Driver"

Installation for Parallel Printing by Plug and Play

The procedure to install the printer driver for Parallel printing by Plug and Play differs depending
on the version of the Windows being used.
P.32 "Windows XP/Server 2003/Vista"
P.35 "Windows 2000"
P.38 "Windows 98/Me"
TopAccessDocMon is not available when this equipment is only connected using the printer
cable. However, when this equipment and your computer are connected to the local area
network as well as this equipment is connected to the parallel port of your computer, you can
use TopAccessDocMon to monitor your print jobs. To install TopAccessDocMon, you must
install it from the Client Utilities CD-ROM separately.
The Font Manager is also available to install and manage the TrueType fonts on your com-
puter. To install the Font Manager, you must install it from the Font CD-ROM that comes with
the Printer Kit or Printer/Scanner Kit.
P.408 "Installing Font Manager"
The Plug and Play function is not supported in the Windows NT 4.0.
Windows XP/Server 2003/Vista
Installing the printer driver for parallel printing by Plug and Play
You must log into Windows as a user who has the "Administrators".
1
Connect the printer cable to this equipment and your computer,
and then power on the equipment and your computer.
The Found New Hardware Wizard dialog box appears.
32 Installing Client Software for Parallel Printing