Toshiba e-STUDIO 520 Printing Manual page 254

5 Printing from Windows
- Print both sides of page — Select this to print the first two page images on both sides of
a cover. This is available only when the 2-Sided Printing option is enabled on the Finish-
ing tab.
If "Print on 1 side of the page" is selected while 2-Sided Printing is performed, the first page
is printed on the front side of the cover sheet and the back side of the cover will be blank.
3) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a sheet fed
from a different Drawers or Bypass tray than the Paper Source option selected on the Basic
tab.
To enable back cover printing, check on the box and select the location from where a back
cover sheet is to be fed and the print style to be used.
Source
Select the location from where a back cover sheet is to be fed. When "Auto" is selected, the
paper is automatically selected according to the printed document size.
The selectable values in the Source drop down menu vary depending on the optional
devices installed on this equipment and their configuration on the Configuration tab.
Print Style
This selects how you want to print a back cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of the page — Select this to print the last page image on the front side of
a cover.
- Print both sides of page — Select this to print the last two page images on both sides of
a cover. This is available only when the 2-Sided Printing option is enabled on the Finish-
ing tab.
If "Print on 1 side of the page" is selected while 2-Sided Printing is performed, the last
page is printed on the front side of the cover sheet and back side of the cover will be
blank.
If "Print both sides of page" is selected but there is only one page printed on the back
cover, the last page is printed on the front side of the cover sheet and back side of the
cover will be blank.
4) Insert Pages
This sets sheet insertion printing which allows you to insert a sheet between pages, or print a
specific page on a sheet fed from a tray other than the Paper Source option selected on the
Basic tab.
This option is useful when you want to insert a blank sheet between chapters, or when you
want to print chapter cover pages on the different paper.
To enable sheet insertion printing, check on the box and click [Edit...] to set how the pages
are inserted in the Insert Pages dialog box.
254 Setting Up Print Options