Center Margin; Outer Margin - Toshiba e-STUDIO 520 Printing Manual

Center Margin

The booklet mode center margin can be selected using the following options.
Alternate
Option Value
Value
centermargin
=value
Example: The command to select the center margin value for booklet printing mode is
"lp -o centremargin=value filename".

Outer Margin

The booklet mode outer margin can be selected using the following options.
Alternate
Option Value
Value
outermargin
=value
Example: The command to select the outer margin value for booklet printing mode is
"lp -o outermargin=value filename".
Collate
The collate option can be selected using the following options.
Alternate
Option Value
Value
collate=off OFF
collate=on ON
Example: The command to select collate off is "lp -o collate=off filename".
Orientation
The following orientation options are available.
Alternate
Option Value
Value
portrait
landscape
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify landscape orientation is "lp -o landscape filename".
Description
Select the center margin value for booklet printing
mode.
This value specifies in pixels the Center Margin or the
"Gutter". This is in addition to the center margin already
specified by the application. The valid range for value is
0 - 300. Default is 0.
Description
Select the outer margin value for booklet printing mode.
This value specifies in pixels the Outer Margin or the
"Creep" per page, which should take place while print-
ing a booklet. The valid range for value is 0 - . Default is
0.
Description
Cancel the collate printing mode.
Set the collate printing mode.
Description
Print the document in portrait orientation.
Print the document in landscape orientation.
Printing from an Application 353