Staple Sort Mode - Toshiba e-STUDIO 520 Operator's Manual

3.Selecting Finishing Modes (Cont.)

Staple sort mode

When the Finisher or the Saddle Stitch Finisher (both optional) is installed, automatic stapling is enabled.
You can select the stapling position from three types.
• The paper weight applicable for this mode is 17 to 28 lb. Bond.
• Special paper such as OHP films or sticker label cannot be used for stapling.
• Copies in different size cannot be stapled.
When the lengths of the copies are the same, they can be stapled even if their sizes are different.
(Example of selecting the [FRONT STAPLE SORT] button)
3
Setting the staple sort mode
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. (
2
Place the original(s).
3
Press the finisher button on the basic menu.
104
3.SETTING OF BASIC COPY MODES
AB
P.75 "6.Bypass Copying")