Changing The Setting Of Paper Size - Toshiba e-STUDIO 520 Operator's Manual

4.Setting Copy Paper (Cont.)

Changing the setting of paper size

If the setting of the paper size registered in the equipment does not correspond to the one in the drawer, it
1
could cause a paper jam. In this case, replace the paper corresponding to the setting of the paper size (
P.49 "Placing paper in the drawer"), or change the setting of the paper size according to the following pro-
cedure.
1
Press the [USER FUNCTIONS] button on
the control panel.
2
Press the [USER] button on the touch panel to enter the user setting
menu, then press the [DRAWER] button.
3
Press the drawer on the touch panel corresponding to the one in
which the paper size has been set, and then press the button indicat-
ing the new one.
52
1.BEFORE USING EQUIPMENT