Clearing The Drawer For Special Uses - Toshiba e-STUDIO 520 Operator's Manual

4.Setting Copy Paper (Cont.)

Clearing the drawer for special uses

1
1
Follow steps 1 to 4 of "Setting the drawer for special uses" (
2
Press the drawer on the touch panel corresponding to the one whose
setting you want to clear, and then press the button indicating the
paper type in this drawer.
• The paper type setting is cleared and the indication of drawer returns to the original state.
When both [INSERT SOURCE 1] and [INSERT SOURCE 2] have been set and only the setting of [INSERT
SOURCE 1] is cleared, the drawer for [INSERT SOURCE 2] changes to the one for [INSERT SOURCE 1].
Adding paper in the Tandem Large Capacity Feeder
This operation is applied only to the Tandem Large Capacity Feeder Type.
1
Pull the Tandem Large Capacity Feeder
out carefully until it comes to a stop.
A: Slide rail
• Be careful not to touch the drawer slide rail.
56
1.BEFORE USING EQUIPMENT
P.54).
A
A