Toshiba e-STUDIO 520 Operator's Manual page 355

• The bypass copying speed is as listed above when specifying the paper size; however when the paper
size is not specified, the copy speed of all sizes is on '*1'.
• The values above are measured when originals are set on the original glass, 1-sided, 100% and non-
sort multiple copies are made.
• "Face up" and "Face down" in the table mean the paper exit faces.
• Only LT-sized paper can be set in the Tandem Large Capacity Feeder.
• This specification varies depending on the copying conditions and the environment.
• The paper mentioned above is Toshiba-recommended paper.
Reversing Automatic Document Feeder
Copy sides
Number of originals (LT)
Feeding speed
Acceptable originals
Paper weight
Power source
1-side, Duplex
100 originals or less than 0.63" in height (13 - 20 lb.)
600 dpi: 71 sheets/min.
300/150 dpi: 83 sheets/min.
400/200 dpi: 79 sheets/min.
LD - ST-R, A3 - A5-R (ST and A5 are not acceptable)
13 - 34 lb. (1-sided original), 13 - 28 lb. (2-sided original)
Power supplied from the equipment
12
353