Toshiba e-STUDIO 520 Operator's Manual page 28

1.Description of Each Component (Cont.)
Other options available are as follows. Contact your service technician or Toshiba product distributors for
1
details.
FAX Unit (GD-1170)
This is a unit for using the equipment as a Fax.
• Installed inside of the equipment
• The PCI Slot (GO-1050) is necessary.
Printer Kit (GM-1050)
This is a kit for using the printing function.
• This kit is for the e-STUDIO520/600/720/850. Use the GM-1051 for the e-STUDIO523/603/723/853.
• Printing using a printer driver supporting XPS is not available.
Printer Kit (GM-1051)
This is a kit for using the printer function.
• Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Printer/Scanner Kit (GM-2040)
This is a kit for using the printing and scanning functions.
• This kit is for the e-STUDIO520/600/720/850. Use the GM-2041 for the e-STUDIO523/603/723/853.
• Printing using a printer driver supporting XPS is not available.
Printer/Scanner Kit (GM-2041)
This is a kit for using the printing and scanning functions.
• Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Scanner Kit (GM-4010)
This kit enables the scanning function.
Memory (GC-1230)
Printing using a printer driver supporting XPS can be performed if this memory is installed together with
the Printer Kit (GM-1051) or Printer/Scanner Kit (GM-2041).
Data Overwrite Kit (GP-1060)
This is a kit to erase the data stored temporarily when copying, printing, scanning, Fax, internet Fax or net-
work Fax is performed. It overwrites temporarily stored data with random data.
• Installed inside of the equipment
Scrambler Board (GP-1040)
This board enhances the security of the equipment. Data are encrypted when they are written into the hard
disk of the equipment, and decrypted when they are read.
• Installed inside of the equipment
• The PCI Slot (GO-1050) is necessary.
Parallel Board (GF-1140)
This unit is used to connect between the equipment and a PC with a parallel cable.
• The PCI Slot (GO-1050) is necessary.
Wireless LAN Module (GN-1041)
This module enables the equipment to be used in a wireless LAN environment.
• Installed inside of the equipment
• The Antenna (GN-3010) is necessary.
• The equipment cannot be connected to the wireless and wired LAN at the same time.
26
1.BEFORE USING EQUIPMENT