Staple Sort Mode - Toshiba e-studio 2550c Copying Manual

3 BASIC COPY MODES
4
Select [ROTATE SORT], and then press [OK].
5
Key in the desired number of copies.
6
Select other copy modes as required, and then press the [START] button on the control
panel.

Staple sort mode

When you make more than one set of copies, the copied paper can be automatically stapled set by set. This
mode is called the staple sort mode. You can choose from 3 different stapling positions.
Example: When [FRONT STAPLE] is selected
Special paper such as OHP film or sticker labels is not applicable.
Copies in different sizes cannot be stapled unless their length is the same.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Place the original(s).
90 Selecting Finishing Mode