Chapter 2: Setting Up Pioneerpos System - PIONEERPOS StealthTouch M5 User Manual

Chapter 2: Setting up PioneerPOS system

2.1 Connecting power
If your system comes with a base, you just need to locate the power cord and plug it to a surge protector or uninterruptible
power supply (UPS) Unit.
[Caution] Do not plug in the unit directly into a wall outlet. Lightning or power surge may damage the system. Always
connect the power through a surge protector or uninterruptible power supply (UPS) unit.
2.2 Connecting cables to I/O panel
1. Tilt the terminal, then remove one Phillips M3 x 6 Big-Cap Black (P/N: 10-S3006BB) screw.
M5
2. Pull I/O Port Cover outward.
3. Gently pull the base back cover outward.
[Note] If there are optional screws at both sides of the base back cover, remove them.
4. Route cables of peripherals to the front.
5. Connect cables to respective ports.
Manual for StealthTouch M5-M7 with Core Pentium & Core i-Series Model v1.0
M7
Page 9