Chapter 4: Network - PIONEERPOS StealthTouch M5 User Manual

Chapter 4: Network

4.1 Wired network
Standard StealthTouch-M5/M7 comes with on-board Intel Network controller. For regular network usage, you just need to
plug in the network cable and it should work. In case you need to check your network setting, you can follow the
instruction below:
1. Start -> Control Panel -> System
Under "Hardware Tab", select "Device Manager"
2.
Expand "Network adapters" selection.
3.
In "Intel 82567M Gigabit Network Connection Properties", you can check items such as: MAC Address, IP
4.
Address, Link Status.
To perform Network Test and Diagnostic under the table "Link Speed". Then, click on "Diagnostics".
5.
Manual for StealthTouch M5-M7 with Core Pentium & Core i-Series Model v1.0 Page 16