Mounting Procedure - SMA Sunny Boy 3800U Installation Manual

Mounting Procedure

The SB3800U is shipped with a removable mounting plate. This plate is also the wall-
mounting bracket suitable for use on most material (see Figure 3-4). The plate has three
holes for mounting to wooden stud wall panels. Make sure that the wall you choose to
mount the Sunny Boy on is sturdy enough to support the weight (38 kg/85 lb.) and that
the wall is plumb. The bracket may also be mounted on stone, brick or solid walls. Be
sure to use the appropriate type of mounting hardware for the wall material and ensure
that the hardware is no smaller than 1/4" diameter.
Stone wall mounting
Be trie
Op era b
tion
Erd
sch
Ear lus s
th Fau
lt
Stö run
g
Fai lur
e
Figure 3-4 SB3800U with removable mounting plate
SB3800U-12:SE2006
Bet rieb
Op era
tion
Erd sch
Ear lus s
th Fau
lt
Stö run
Fai lure g
SMA America
Wood wall mounting
3-5