Motorola AP-5181 Deployment Manual page 3

Deployment Guide
Introduction
This guide provides detailed hardware setup and deployment instructions for the AP-5181 model access point.
The AP-5181 model access point is primarily designed for outdoor deployments, thus it has a unique set of
installation instructions.
Please review all the material within this document before installing the AP-5181 model access point. The
purpose of this guide is to assist you in understanding the correct use and placement of the components within
the AP-5181 accessory kits. Proper installation is critical to the safety of the installation, installer and others in
the area of the AP-5181's deployment
Mounting Kit and Assembly
It is recommended the assembly of the AP-5181's accessories be started, and fully staged (as described in this
chapter) before the AP-5181 is moved into its final area of deployment.
Installing the AP-5181's Mounting Accessories
To install the AP-5181's mounting accessories:
1. Install the mounting bracket to the AP-5181's rear housing using 4 short length binder head screws from
the kit. Tighten securely.
NOTE
.
Take note of the earth ground boss under the bracket. This point must be properly
grounded to earth to utilize this products safety features. This is a good time to add the
required grounding lug or cable (not included with the AP-5181 or mounting kit).
3