At The End Of A Programme; Changing A Programme; Cancelling A Programme - CDA wc140in Installation & Use Manual

Please note: The dishwasher stores the most recently used
programme in its memory. To change the programme, simply
press the "Programme Selection" button.

At the End of a Programme

If possible, do not open the dishwasher door once the programme has
started.
At the end of the programme, the dishwasher will beep five times, and the
"End of Programme Indicator" light will switch on.

Changing a Programme

It is possible to change the programme if necessary once the
programme has started.
• First open the door slightly to reduce the risk of water spillage.
• Press the "Programme Selection" button until the required
"Programme Indicator" light is illuminated.
• Then close the door. The dishwasher will begin the new programme
from the point at which the old programme stopped.

Cancelling a Programme

It is possible to cancel the programme once the programme has
started.
• First open the door slightly to reduce the risk of water spillage.
• Press and hold the "Programme Selection" button for approximately
three seconds, until the end of "Programme Indicator" light flashes
and the "Programme Indicator" light switches off.
• Then close the door. The dishwasher will drain for approximately
thirty seconds. Once this is complete, the dishwasher will beep five
8