Fault Codes - CDA wc140in Installation & Use Manual

Fault Codes

The programme indicators also serve as a diagnostic display to help
in the event of a problem with the appliance.
Intensive Normal
22
Error code
Eco Quick Prewash
Error
description
Make sure the water inlet tap is fully
open. Close the water tap, separate
Inadequate the water inlet hose from the tap
water supply and clean the filter. Restart your
machine and contact CDA service if
the error continues.
Close the tap and contact
Continual fill
error
Drain hose is blocked.
The waste
The filters of your machine might
water in the
machine
Restart the dishwasher and cancel
cannot be
the programme. If the error
discharged.
continues contact CDA service.
Heater error Contact CDA service.
Alarm is active Turn off the dishwasher and
against water disconnect from the water supply.
overflow Contact CDA service.
Faulty
Contact CDA service.
electronic card
Overheating
error
(temperature Contact CDA service.
in the machine
is too high.)
Faulty heater
Contact CDA service.
sensor
Advice
CDA service.
be blocked.