SCW 22‑A cordless circular saw In these operating instructions, the designation “the It is essential that the operating instructions power tool” always refers to the SCW 22-A cordless are read before the power tool is operated for circular saw. the first time.
Do not use the battery as a power source for other unspecified appliances. To avoid the risk of injury, use only genuine Hilti accessories and insert tools. Observe the information printed in the operating instructions concerning operation, care and maintenance.
Page 8
C < 10 % 2.8 Items supplied as standard Power tool Saw blade Hexagon socket wrench Operating instructions Hilti toolbox (optional) Cardboard box (optional) Rip fence Connecting piece for sawdust extractor Guide rail adapter (optional) 2.9 Additional items required for operating the tool One B 22/3.3 Li‑Ion battery or one B 22/2.6 Li‑Ion battery for the SCW 22‑A plus a C4⁄36‑90 or C4⁄36‑350 or C4/36 or...
Battery B 22/3.3 Li‑Ion B 22/2.6 Li‑Ion Rated voltage 21.6 V 21.6 V Capacity 3.3 Ah 2.6 Ah Energy capacity 71.28 Wh 56.16 Wh Weight 0.78 kg 0.78 kg Type of cell Li‑Ion Li‑Ion No. of cells Deep discharge protection 5 Safety instructions NOTE moving parts.
Page 11
5.1.4 Power tool use and care 5.2 Safety instructions for all saws a) Do not force the power tool. Use the correct 5.2.1 Cutting procedures power tool for your application. The correct power DANGER tool will do the job better and safer at the rate for Keep hands away from cutting area and the blade.
Page 12
b) When blade is binding, or when interrupting a 5.3 Additional safety instructions cut for any reason, release the trigger and hold 5.3.1 Personal safety the saw motionless in the material until the blade a) Wear ear protectors. Exposure to noise can cause comes to a complete stop.
Use of unap- of the type recommended by Hilti for wood dust proved batteries or use of the batteries for areas of and/or mineral dust together with this tool. Ensure application for which they are not approved presents that the workplace is well ventilated.
Before fitting the battery, check that the power tool is port position). switched off and the switch-on interlock is activated (not pressed). Use only the Hilti batteries approved If you disconnect a battery from the power tool for trans- port or storage, make sure that the battery contacts are for use with this power tool.
Page 15
sharp saw blade is an essential requirement for a perfect 7.4 Sawing along a line cut. There is a cutting line indicator for straight cuts or bevel cuts (0° and 45°) at the front section of the base plate of 7.1.1 Removing the saw blade 2 the power tool.
The saw blade will otherwise come into contact with the guide rail. CAUTION As far as possible, use a suitable Hilti sawdust ex- 7.7.4 Cuts at an angle across the surface of the tractor/deduster, whatever the application. Use a res-...
It Have the power tool repaired by Hilti Service. is still possible to work with this battery. You should, however, soon replace the battery with a new one.
Dispose of the batteries in accordance with national regulations or return them to Hilti. Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling.
12 EC declaration of conformity (original) Hilti Corporation, Feldkircherstrasse 100, Designation: Cordless circular saw FL‑9494 Schaan Type: SCW 22‑A Generation: Year of design: 2010 We declare, on our sole responsibility, that this product Paolo Luccini Jan Doongaji complies with the following directives and standards:...
Need help?
Do you have a question about the SCW 22-A and is the answer not in the manual?
Questions and answers