Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
Page 4
Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
Page 5
▶ Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. ▶...
Page 6
▶ Avoid overheating the tips of the saw blade teeth. ▶ Always use a saw blade that is suitable for the material you are going to saw. ▶ Use only saw blades recommended by Hilti that comply with the EN 847-1 standard. English...
Page 10
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group English Printed: 23.04.2018 | Doc-Nr: PUB / 5257984 / 000 / 02...
The operating voltage of the transformer or generator must always be within +5 % and -15 % of the rated voltage of the device. SCW 70 WSC 7.25S Weight in accordance with EPTA procedure 01 5.1 kg...
Operation Removing the saw blade WARNING Risk of burning injury. A hot accessory tool, clamping flange or clamping screw and the sharp edges of the saw blade present hazards. ▶ Wear protective gloves when changing saw blades. 1. Disconnect the supply cord plug from the power outlet. 2.
Page 13
Adjusting the cutting depth 1. Disconnect the supply cord plug from the power outlet. 2. Rest the circular saw on a flat surface. 3. Release the cutting depth adjustment clamping lever. 4. Lift the circular saw in a scissoring movement and set the cutting depth. ◁...
Page 14
5. Pivot the base plate to the stop. 6. Tighten the cutting angle adjustment clamping lever. Cutting line indicator At the front edge of the base plate of the circular saw is a line indicator for straight cuts and miter cuts (0° and 45°).
Page 15
Sawing with the guide rail. Sawing with the guide rail can reduce the risk of kickback. 5.8.1 Inserting into / removing from the guide rail adapter 1. Remove the rip fence, if one is fitted. 2. Fit the front edge of the base plate into the front retaining lugs on the guide rail adapter. 3.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Need help?
Do you have a question about the SCW 70 and is the answer not in the manual?
Questions and answers