Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hilti SCW 18-A
Summary of Contents for Hilti SCW 18-A
- Page 1 SCW 18-A English Français Español...
- Page 6 SCW 18-A Original operating instructions ........
- Page 7 We reserve the right to make changes. Errors excepted. 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered.
- Page 8 ▶ Make a note of this data in the following table and always refer to it when making an enquiry to your Hilti representative or Hilti Service Center. Product information Circular saw SCW 18A Generation Serial no. 2 Safety 2.1 Safety instructions The safety rules given in the following section contain all general safety rules for electric tools which, in accordance with the applicable standards, require to be listed in the operating instructions.
- Page 9 ▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. ▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 10 Kickback causes and related warnings • kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; • when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator;...
- Page 11 ▶ If the battery is too hot to touch it may be defective. In this case, place the power tool in a non- flammable location, well away from flammable materials, where the battery can be kept under observation and allowed to cool down. Contact Hilti Service after the battery has cooled down. 3 Description 3.1 Overview of the product...
- Page 12 To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com 3.6 Accessories...
-
Page 13: Operation
4 Technical data 4.1 Circular saw SCW 18A Rated voltage 21.6 V Weight 8.6 lb (3.9 kg) Specified blade diameter 6.3 in … 6.5 in (160 mm … 165 mm) Blade disc thickness 0.02 in … 0.06 in (0.5 mm … 1.5 mm) Kerf width 0.06 in …... - Page 14 Note Check that the blade to be fitted complies with the technical requirements and that it is well sharpened. A sharp saw blade is an essential requirement for a perfect cut. 1. Pull the battery out of the product to the rear. 2.
- Page 15 5.7 Sawing along a line Note Secure the workpiece to prevent movement. Position the workpiece so that the saw blade is free to rotate beneath it. Check to ensure that the on/off switch on the product is in the “off” position. Position the forward section of the saw’s base plate on the workpiece but do not bring the blade into contact with the workpiece.
- Page 16 Note To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com 6.2 Care of the lithiumion batteries...
-
Page 17: Troubleshooting
◁ The pivoting guard must close quickly and completely when the guard operating lever is released. 7 Troubleshooting ▶ If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service. 7.1 The circular saw is not in working order. Malfunction... - Page 18 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 19 Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20150911...
Need help?
Do you have a question about the SCW 18-A and is the answer not in the manual?
Questions and answers