Table of Contents
Advertisement
After Cleaning, Replace the Inner Glass
Pane
When replacing the inner glass pane, make sure
that:
−
You replace the pane correctly, as shown. The
pane must be in the position described below
in order to fit into the door and to ensure that
the oven operates safely and correctly.
−
You take extra care not to bump the edges of
the glass against any object or surface.
−
You do not force the pane into place. If you are
experiencing difficulties replacing the pane,
remove it and start the process again from
the beginning. If this still does not help, call
Customer Care.
To reassemble the inner pane of the oven door
operate as follows:
1.
Make sure the door is locked open (see fig. 26).
2.
Replace the inner pane:
−
Check that the four rubber pads are in place
(D in fig. 28).
IMPORTANT: It is advisable, while refitting
the glass, to keep pressed in position the four
rubber pads D, by a finger, to avoid breakage
or slippage of the rubber pads themselves
(Fig. 29).
−
Check that you are holding the pane the
correct way. You should be able to read the
wording on it as it faces you.
−
Insert the pane in the left E and right F slide
guides (fig. 29), and gently slide it to the
retainers H (Fig. 30).
−
Unlock the oven door by opening it
completely and closing the lever A on the left
and right hinges (fig. 31).
20
D
Fig. 28
Fig. 29
E
Fig. 30
Fig. 31
F
H
A
Advertisement
Table of Contents
