Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CDA SC211
Summary of Contents for CDA SC211
- Page 1 Manual for Installation, Use and Maintenance Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
- Page 2 Keep the oven door closed whilst grilling. Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes.
-
Page 3: First Use Of The Oven
A slightly unpleasant smell may be produced, caused by grease remaining on the oven elements from the production process. 15 minutes grill. 60 minutes fan oven (SC211/SC221/SC611) 60 minutes fan assisted oven (SC511 only) Please note: •... -
Page 4: Oven Controls And Use
Oven controls and use Temperature knob • To set the temperature, turn the temperature knob clockwise to the required temperature between 50˚ C and 240˚ C . • Once the oven has reached the required temperature, the temperature indicator lamp on the control panel will switch off. •... - Page 5 This function uses the fan and upper elements with the fan to create a powerful heat with a temperature between 50˚ C and 240˚ C . This function is recommended for efficient and fast cooking, with direct heat on the top, for example gratin dishes. Oven functions SC211 SC221 SC511 SC611 √...
-
Page 6: Programming The Oven
Programming the oven PLEASE NOTE: The display brightness automatically reduces between the hours of 22.00 and 06.00. The alert beep will cut off after two minutes if it is not switched off manually. Setting the clock fig. 1 The clock is preset to 00:00, and will revert to this after a power failure. •... - Page 7 To set a fully automatic cooking programme, follow step 1 and 2 above, and then: 3. Press button and then press the buttons to select the required end time for cooking. AUTO will show on the clock display. To check on the time remaining on the programme, press button When the cooking time is completed, the timer will beep.
-
Page 8: Removing The Oven Door
Cleaning and Maintenance - Changing the Oven Lamp Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply. If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance. Changing the bulb (fig. - Page 9 Cleaning and Maintenance - Removing the Oven Door Inner Glass To remove the inner pane of the top oven door on both sides 1. Remove the oven door as shown above. 2. Release the two upper blocks by pressing down as shown in fig. 4. 3.
-
Page 10: Installation
Installation Important If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not installed as it could restrict ventilation. Ensure that air can flow freely around the housing area. If the oven is being installed into a fully enclosed built-under oven housing unit it may be necessary to cut a small slot in the top of the plinth fitted under the unit. -
Page 11: Electricity Supply To Your Oven
Electricity supply to your oven Warning! this appliance must be earthed. This appliance must be connected by a competent person, using fixed wiring via a double pole switched fused spur outlet. We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E and local regulations. - Page 12 Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
Need help?
Do you have a question about the SC211 and is the answer not in the manual?
Questions and answers