CDA sg120 Series Manual For Installation, Use And Maintenance page 18

Refitting the Oven Door
− Hold the door firmly (fig. 21).
− Insert the hinge tongues into the slots,
making sure that the groove drops into place
as shown in the fig. 22.
− Open the door to its full extent.
− Fully close the levers "A" on the left and right
hinges, as shown in the figure fig. 23.
− Close the door and check that it is properly in
place.
Removing and Replacing the Inner Door
Glass Pane for Cleaning
If you wish to clean the inner glass of the door, make
sure you follow the precautions and instructions very
carefully.
Replacing the glass pane and the door incorrectly
may result in damage to the oven and may void your
warranty.
IMPORTANT!
− Take care, the oven door is heavy. If you have any
doubts, do not attempt to remove the door.
− Make sure the oven and all its parts have cooled
down. Do not attempt to handle the parts of a hot
oven.
− Take extreme care when handling the glass pane.
Avoid the edges of the glass bumping against any
surface. This may result in the glass shattering.
− Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering
of the glass.
− If you notice any sign of damage on any of the
glass panes (such as chipping, or cracks), do not
use the oven. Call your Authorised Service Centre
or Customer Care.
− Make sure you replace the glass pane correctly. Do not use the oven without glass pane correctly in place.
− If the glass pane feels difficult to remove or replace, do not force it. Call your Authorised Repairer or
Customer Care for help.


Note: service visits providing assistance with using or maintaining the oven are not covered by your
warranty.
18
Fig. 21
Fig. 22
Fig. 23
A