CDA SA116 Manual For Installation, Use And Maintenance

CDA SA116 Manual For Installation, Use And Maintenance

Single oven

Advertisement

Quick Links

SA116 Single Oven
Manual for Installation, Use and Maintenance
Passionate about style
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu

Advertisement

Table of Contents
loading

Summary of Contents for CDA SA116

  • Page 1 Manual for Installation, Use and Maintenance Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...
  • Page 2: User Information

    Keep the oven door closed whilst grilling. Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes.
  • Page 3 Important • Read the user instructions carefully before using the oven for the first time. • Follow the instructions for first use of the oven. • Clean the oven regularly. • Remove spills as soon as they occur. • Always use oven gloves when removing shelves and trays from the ovens. •...
  • Page 4: First Use Of The Oven

    First use of the oven First use • Before using the oven for the first time we recommend that you clean the oven with soapy water, rinse carefully and then heat on each of the below programmes at maximum temperature for the specified time. A slightly unpleasant smell may be produced, caused by grease remaining on the oven elements from the production process.
  • Page 5 Oven controls & use Cooking function knob To set the function, turn the cooking function knob clockwise to the required function. Each of the oven functions uses different elements within the oven to offer you the best choice of cooking every time. These are explained below: Conventional Oven This function uses the top and bottom heating elements with a temperature between 50...
  • Page 6: Changing The Oven Lamp

    Changing the Oven Lamp Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply. If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance.
  • Page 7: Cleaning And Maintenance

    Cleaning and Maintenance - Removing the Oven Door The oven doors can easily be removed as follows: • Open the door fully. • Open the lever on the left and right hinges (as show in figure 2). • Gently close the door until left and right hinge levers are hooked to the door. •...
  • Page 8 Cleaning and Maintenance - Removing the Oven Door Inner Glass To remove the inner pane of the top oven door on both sides 1. Remove the oven door as shown below. 2. Release the two upper blocks by pressing down as shown in fig. 3. 3.
  • Page 9: Installation

    Installation Important If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not installed as it could restrict ventilation. Ensure that air can flow freely around the housing area. If the oven is being installed into a fully enclosed built-under oven housing unit it may be necessary to cut a small slot in the top of the plinth fitted under the unit.
  • Page 10: Electricity Supply To Your Oven

    Electricity supply to your oven Warning! this appliance must be earthed. This appliance must be connected by a competent person, using fixed wiring via a double pole switched fused spur outlet. We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E.E and local regulations.
  • Page 11 Notes :...
  • Page 12 Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu...

Table of Contents