Internal Alarms; Mob Alarm; External Alarms - Raymarine ST60+ Owner's Handbook Manual

12

Internal alarms

The internal alarms are as follows:
Message
MOB
ANCHOR ALARM
SHALLOW ALARM
DEEP ALARM
HIGH WIND ALARM
speed)
RADAR ALARM
LOST FIX ALARM
LOW BATTERY ALARM
voltage)

MOB alarm

If a MOB alarm occurs, the bearing and distance to the MOB location are
displayed, provided this information is available on SeaTalk. If the elapsed time
since the event is available, this is also displayed.
If bearing and distance information are NOT available, a Man Overboard symbol
is displayed, thus:

External alarms

An optional Auxiliary Alarm can be fitted at a convenient remote position, to give
a loud, audible indication if any one of a range of alarms occurs. This option is
particularly useful for situations where high ambient noise may make it difficult to
hear the instrument's internal alarm (e.g. aboard a power boat).
An Auxiliary Alarm cannot be used if the NMEA OUT port is being used for NMEA
Note:
data.
ST60+ Graphic Display Owner's Handbook
(with current depth)
(with current depth)
(with current depth)
(with current wind
(with current
Meaning
Man Overboard alarm (see below)
Deep or shallow anchor alarm
Shallow water alarm
Deep water alarm
High wind speed alarm
Radar guard zone alarm
Lost fix alarm
The battery voltage has fallen below
the specified low-voltage level.