Selecting Pages; Display Types - Raymarine ST60+ Owner's Handbook Manual

Chapter 1: Operation

Selecting pages

To see the information you want, refer to the
diagram above, to determine the location of the information you need (i.e. which
chapter and page), then:
1. Press the
chapter. If the chapter title facility is enabled during User calibration, the
name of each chapter is briefly displayed when it is first selected.
Although most chapter names are displayed in full, the Environment chapter is ab-
Note:
breviated to ENVIRONS and the Autopilot chapter is abbreviated to PILOT .
2. With the appropriate chapter selected, use the
required page.
The manner in which information is accessed is shown in the following illustration
This shows (as an example) how to display true wind speed information.
Selecting chapter
How to select a page

Display types

The ST60+ Graphic Display pages show either 1, 2, 3 or 4 data elements in
alphanumeric form. In addition, single-element pages can also show graphic
information, such as a rolling road and graphs.
button the necessary number of times, to select the required
PILOT
DEPTH
SPEED
Chapter selection and content
button to select the
Either press
or wait for
2 second
time out
WIND
3
Selecting page
D6432-1