Power Supply And Backup Battery; Turning The Model 1100 On - Phonetics SENSAPHONE 1100 Owner's Manual

Desktop environment monitoring system
Table of Contents

Advertisement

protection be obtained for the unit and for any electronic equipment that
is attached to your power supply and telephone lines. Power surge
protection is especially Important if you live in a lightning-prone area. The
ISOTEL Surge Protector Model IB-4 is available through Phonetics. See
Appendix B.

POWER SUPPLY AND BACKUP BATTERY

The 1100 is provided with an AC power transformer. Plug the transformer
into any standard 110 VAC outlet. Remove the battery compartment door
on the back of the unit. NOTE: Be sure that the AC transformer is
plugged into an outlet before putting the batteries into the unit. Install 6
D-cell alkaline batteries (not included) in accordance with the diagram
below. The batteries enable the Model 1100 to continue functioning when
AC power is removed. Replace the battery compartment door.
-
-
-
+
+
+
-
-
-
+
+
+
Figure 2: Battery installation

TURNING THE MODEL 1100 ON

The ON and OFF keys on the Model 1100 keypad are used to activate
and deactivate the unit. To turn the unit ON, press the ON key. The
system ON light will begin to glow. The unit will say 'Hello, or beep if it is
already on.
When the unit is ON, it is able to receive incoming calls and automatically
dial out in the event of an alarm on one of the monitored conditions. The
red light will glow as long as the unit is on.
When you press OFF, the 1100 will say "Have a good day," and the
system ON light will stop glowing. All functions are disabled except the
battery backup. The
batteries will still discharge if the AC transformer is unplugged from the
110 VAC outlet.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents