Phonetics SENSAPHONE 1100 Owner's Manual page 42

®
Sensaphone Model 1100 Instruction Manual
7. After the fourth repetition, the 1100 will request acknowledgment:
"Hello, this is telephone number 555-5674.
Indicate you have received warning message."
Acknowledgment:
1. You received the alarm call at a rotary (pulse) phone, so you cannot
enter the 555 code to acknowledge the alarm.
2. After 5 seconds, the 1100 says:
"Dial telephone number 555-5674 within 60 seconds."
3. You call the unit back within 60 seconds. After 10 rings (TAD disabled),
the 1100 answers and says:
"Hello, this is telephone number 555-5674.
The time is 1:15 AM.
Alert condition one exists.
The temperature is 70 degrees.
OK.
The electricity is ON.
Battery condition OK.
Sound level OK.
Listen to sound level for 10 seconds (listen).
Warning message received by telephone number 555-1222.
Have a good day."
4. Once the alarm has been acknowledged, the dialout sequence is
stopped.
NOTE: The 1100 will not dial out for alert condition one until after the
sensor is returned to its normal state (NC.) and is retripped.
EXAMPLE 2:
Alarm recognition:
Input #2 is monitoring humidity in the greenhouse. The humidifier mal-
functions causing the moisture level to drop below programmed safe
levels, endangering delicate ferns. The condition causes the humidistat to
trip an alarm. The alert on input #2 causes the 1100 to dialout.
Dialout:
1. After the 30-second call delay time, the 1100 dials Phone #1(555-
1111).
2. The call is answered. The 1100 repeats the following alarm message:
"Hello. This is telephone number 555-5674. Alert condition two
40