Phonetics SENSAPHONE 1100 Owner's Manual page 39

Desktop environment monitoring system
Table of Contents

Advertisement

call is not answered. If you do not answer the phone until a later
ring, it is possible for you to miss hearing the alarm message.
Also, if you have an answering machine, the 1100 will be talking
during your outgoing message, so you will not get the full alarm
message when the machine begins to record incoming mes-
sages.
Below is an example of what the 1100 says:
"Hello, this is telephone number 555-5674. Alert condition one exists. (4-
second listen in time)
Hello, this is telephone number 555-5674. Alert condition one exists. (4-
second listen in time)
Hello, this is telephone number 555-5674. Alert condition one exists. (4-
second listen in time)
Hello, this is telephone number 555-5674. Alert condition one exists. (4-
second listen in time)
Hello, this is telephone number 555-5674.
Indicate you have received warning message."
Acknowledgment:
1. The 1100 will wait 5 seconds for the Touch-Tone acknowledgment
code
"555" to be entered. If the code is entered within 5 seconds the
1100 will say:
"Warning message received by telephone number 555-1111."
The alarm has been acknowledged and the dialout will CEASE.
2. If the 1100 does not receive the Touch-Tone code within 5 seconds, it
recites the following and then hangs up:
"Dial telephone number 555-5674 within 60 seconds."
If the call was answered, the receiver must call the unit back within 60
seconds to acknowledge the alarm. If local voice mute is off, the unit will
beep locally during the 60-second wait time.
3. When you call the unit back to acknowledge the alarm, the unit waits
10 rings before answering to protect against random acknowledgment. If
you have an answering device on the same line as the 1100 and you
have TAD enabled, the 1100 will answer on the first ring. When it an-
swers, the 1100 will recite a status report and then say:
"Warning message received by telephone number (last number
dialed). Have a good day."
The unit will hang up. The alarm has been acknowledged and the dialout
sequence stopped.
4. If the call was not answered, was received by an answering machine
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents