High Sound Alarm Enable I Disable - Phonetics SENSAPHONE 1100 Owner's Manual

To program the power recognition time:
1. Press the SET key
2. Press the ELECT key
3. Using the number keys, enter the number of seconds
The Model 1100 will recite the digits as they are pressed
4. Press ENTER
The Model 1100 will say "Enter."
SET 7
To interrogate:
1. Press the WHAT IS key
2. Press the ELECT key
If the power alarm is enabled (see AC Power Monitoring), the 1100 will
recite the programmed power recognition time. If the power alarm is
disabled, the 1100 will say "Off" and then recite the programmed power
recognition time.
WHAT
7
IS

HIGH SOUND ALARM ENABLE I DISABLE

The Model 1100 monitors sound through the built-in microphone. When
the current sound level suddenly exceeds the normal sound level, the
high sound alarm causes the Model 1100 to dial out. The increased
sound level must exist for at least eight seconds. The default for the high
sound alarm is enabled (on). The microphone is also used to listen in to
on-site sounds. See Chapter 3.
NOTE: Disabling the sound alarm does not affect listen-in
capability.
To enable/disable the high sound alarm:
1. Press the SENSOR ON/OFF key
2. Press the SOUND key
The 1100 will say "Off" to indicate disabled. The 1100 will say "On" to
indicate
enabled.
3. Repeat key sequence to change.
ELECT
(enter seconds)
ELECT
ENTER
PM
29