Download Print this page

Start-Up Operation - Epson PS-100 User Manual

Hide thumbs

Advertisement

4
Remove the product from the cradle.
Press the small tab down and push the PS-100 out from the back.
The product is ready for Bluetooth pairing when fully charged and detached from the charging cradle.

Start-up operation

All LEDs light up in sequence and the PS-100 vibrates.
! Important
- Pair with your smart device after purchase. The memory of your device will not be enabled until pairing
is completed.
- If you remove the PS-100 from your wrist and no movement is detected, it will go into sleep mode. It will
re-wake if the product is moved.
Set up and basic operation • 14

Advertisement

loading

  Also See for Epson PS-100