Oven Tips - Amana ARK7700 Use And Care Manual

Oven Rack Placement
Oven racks should be positioned before the
oven is turned on.
1. Pull rack forward to the stop position.
2. Raise the front edge and pull it out of the
oven.
3. Place rack in desired location.
Note: The curved edge of the rack must be
facing up and toward the rear of the oven.
Convection Pan Placement
Baking pans and cookie sheets should not touch
the side or rear walls of the oven. If pans are
placed on different racks, they can be placed
directly over each other. Convection cooking
circulates air around the oven providing even
browning on all rack positions. When using
convection, the oven can be loaded on all racks
with excellent cooking results.
Conventional Pan Placement
Baking pans and cookie sheets should not touch
the side or rear walls of the oven. If baking pans
are placed on different racks, they should be
staggered so that one is not located directly
under another. This will prevent uneven browning
of foods.
Oven Rack
Convection Pan Placement
Conventional Pan Placement
Smoking and odor is normal when using
the oven the first few times. To eliminate
subsequent smoking and odor, set the oven
to bake at 350* for approximately 2 hours.
Any discoloration or residue collected
around the vent area can be cleaned with a
nonabrasive cleaner such as Soft Scrub@
and a dampened cloth.

Oven Tips