Amana ARK7700 Use And Care Manual page 10

Operating The Surface Elements
Hot Indicator Lights
The range has four hot indicator lights, one
located above each control knob. The hot
indicator lights will glow red when the
corresponding element is turned on. The light
will remain on until the corresponding element
has cooled to a safe temperature.
LO through 3 should be used for food that is prepared at less than boiling temperatures or
to simmer. When using settings LO through 3 on the 10 position Haloring@ knob the element
will not be illuminated.
MED LO or 4 through 5 can be used to maintain boiling in moderate amounts of liquid.
MED or 6 through 7 should be used to maintain boiling of larger amounts of food, low
temperature frying, and to maintain correct pressure in a pressure cooker.
MED HI or 7 through 9 can be used to fry meat and poultry or to maintain deep-fat frying
temperatures.
HI should be used to bring food to boiling temperatures. When the food is boiling the
temperature should be reduced to MED LO, MED or 4, 5, 6, 7.
Right Front Surface Element Hot
Cooking Guide
Indicator Light
0 0
0 0