Stopping The Inverter; Normal Operation; During An Emergency - Westinghouse WH1000i Owner's Manual

STOPPING THE INVERTER

Normal Operation

During normal operation, use the following steps to stop
your inverter:
1. Remove any connected loads from the control
panel receptacles.
2. Allow the inverter to run at "no load" to reduce and
stabilize engine and alternator temperatures.
3. Move the engine control switch to the OFF position.
4. Turn the fuel tank vent to the OFF position.

During an Emergency

If there is an emergency and the inverter must be
stopped quickly, move the engine control switch to the
OFF position immediately.
OPERATION
31