Table of Contents
Advertisement
Available languages
Available languages
Using your refrigerator
To obtain the best possible results from your refrigerator,
it is important that you operate it properly. This section
tells you how to set the controls, remove and adjust the
features in your refrigerator, and how to save energy.
WARNING
Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion,
or fire.
Removing the lower
ventilation panel
To remove:
1. Grasp both ends of the lower panel.
2. Push straight up, then pull straight out.
To replace:
1. Insert hooks (located on back of lower panel) into
slots on side trim.
2. Pull lower panel down slightly to lock into place.
Upper
panel
Removing the upper
ventilation panel
To remove:
1. Remove the lower ventilation panel as described on
this page.
2. Remove two hex screws with a 1/4" socket.
3. Grasp both ends of upper panel.
4. Pull straight down, then pull straight out.
To replace:
1. Insert hooks (located on back of upper panel) into
slots on side trim.
2. Push panel straight up until holes are aligned.
Replace hex screws.
Using the Power On/Off Switch
Lower panel
The Power On/Off Switch is located behind the
ventilation panels. It is used to turn the power to the
refrigerator off when cleaning it or changing light bulbs.
To turn power off:
1. Remove lower and upper ventilation panels.
2. Press Power On/Off Switch to "OFF" position.
To turn power on:
1. Press Power On/Off Switch to "ON" position.
2. Replace lower and upper ventilation panels.
IMPORTANT: Be sure the Power On/Off Switch is in
the "ON" position after cleaning refrigerator or changing
light bulbs.
Screw location
5
Advertisement
Chapters
Table of Contents
