Bang & Olufsen BeoSound 5 Encore Installation Manual page 4

Example of a full installation setup
Connection
This example shows the connection principles in a full installation setup (not all components are necessary, e.g. ML Gateway):
Main room
Master Link
Radio/CD
Video master
BeoSound 5
Audio/Video
Bang & Olufsen
Power/USB/DVI
BeoMaster 5
- a wired ethernet connection (Local Area Network connection - LAN), and/or
- a wireless ethernet connection (Wireless Local Area Network connection - WLAN at 5 GHz)
A wired connection is strongly recommended by Bang & Olufsen.
- a Network Attached Storage (NAS), or
- a BeoMaster 5 from an existing BeoSound 5 setup. In this case the BeoMaster 5 will act as a Network Attached Storage (NAS).
From this point, the installer must choose the connection type to be used in the setup to continue the installation. Click the link below:
Wired connection (LAN)
Wireless connection (WLAN)
Link room Link room
BeoSound 5 Encore BeoSound 5 Encore
Connection
Technical control room
Home
Automation
Internet
System
(192.168.1.X)
ML Gateway
(192.168.1.10)
ISP router
(192.168.1.1)
NAS
(192.168.100.X)
Network Link router
Ethernet switch
(192.168.100.1)
IP addresses are only examples
4
existing network
Client PC/MAC
(192.168.1.X)
Network Link
Client PC/MAC
(192.168.100.X)