Bang & Olufsen BeoSound 5 Encore Installation Manual page 13

WIRELESS - AUTO
The WIRELESS - AUTO
manually. Follow the procedure below to establish the wireless network connection:
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS, and press GO.
> Use the pointer to highlight NETWORK SETTINGS.
> Turn the wheel to select WIRELESS - AUTO, and press GO.
5 GHz wireless networks. A process ring is shown around the wheel to indicate
that the process is on-
found networks will be displayed.
> Use the wheel to select the prefered network, and press GO.
> Enter the password for the wireless network, and press GO*.
When the process is completed successfully the network name of the router (SSID)
is displayed with the text CONNECTED!.
If the process fails due to a wrongly entered PASSWORD, the text FAILED shortly
appears before the product returns to the NETWORK SETTINGS menu.
> Use the pointer to highlight NETWORK INFO
strenght for WIRELESS LEVEL is '
! If the signal strenght is '
not
' (or more).
***
**' (or less), a wireless network connection should
be recommended.
MODE
SOUND
SYSTEM SETTINGS
MAINTENANCE
WIRELESS - AUTO
SERVICE SETTINGS
ACCESS POINT
NETWORK INFO
NETWORK SETTINGS
ROLES
WIRELESS - AUTO
ACCESS POINT
NETWORK INFO
* When entering the password, always distinguish
between uppercase letters and lowercase letters.
HOSTNAME
SYSTEM SETTINGS
MAC ADDRESS
NETWORK CONNECTION
DHCP
MAINTENANCE
IP ADDRESS
SUBNET MASK
GATEWAY
DNS SERVER
SERVICE SETTINGS
WIFI STATUS
WIFI ACCESS POINT
WIFI LEVEL
NETWORK INFO
'Access point 1' (WPA2)
'Access point 2' (WPA2)
'Access point 3' (None)
'Access point 1' (WPA2)
'Access point 2' (WPA2)
'Access point 3' (None)
BeoSound5-Encore- serial no.
00-09-A7-00-C1-XX
YES
ENABLED
192.168.100.X
255.255.255.0
192.168.100.1
192.168.100.1
ENABLED
SSID name (Encryption Standard)
*****
0 dBm