Bang & Olufsen BeoSound 5 Encore Installation Manual page 11

Network settings (LAN)
The next step is to ensure that the network connection is correct in order to be able to acces the network components, the Internet, ect. The
Check network connection
By default the product is set to obtain network settings such as IP address and
In this case it is not necessary to perform any network settings. Follow the
procedure below to check the network connection:
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS, and press GO.
> Use the pointer to highlight NETWORK INFO.
If not, NETWORK SETTINGS must be made manually (see below).
> Use the pointer
address, subnet mask, gateway and DNS addresses, they must be assigned
manually. Follow the procedure below:
> Turn the wheel to select SETTINGS, and press GO.
> Use the pointer to highlight NETWORK SETTINGS.
> Turn the wheel to select ADVANCED, and press GO.
> Turn the wheel to select DHCP, and press GO.
> Turn the wheel to select DISABLED, and press GO (now the greyed out items
> Fill in the IP ADDRESS, SUBNET MASK, GATEWAY and DNS SERVER manually
> Use the pointer
MODE
SOUND
HOSTNAME BeoSound5-Encore-xxxxxxxx
SYSTEM SETTINGS
MAC ADDRESS 00-09-A7-00-C1-09
DHCP ENABLED
IP ADDRESS 192.168.100.X
MAINTENANCE
SUBNET MASK 255.255.255.0
GATEWAY 192.168.100.1
DNS SERVER 8.8.8.8
NETWORK CONNECTION YES
SERVICE SETTINGS
WIFI STATUS DISABLED
WIFI ACCESS POINT WIFI ACCESS POINT NOT CONFI...
WIFI LEVEL 0 dBm
DHCP
NETWORK INFO
WIFI QUALITY 0 dBm
IP ADDRESS
NETWORK SETTINGS
SUBNET MASK
GATEWAY
ROLES
DNS SERVER
NETWORK CONNECTION
WIFI STATUS
MODE
SOUND
SYSTEM SETTINGS
MAINTENANCE
SERVICE SETTINGS
DHCP
2
1
WIRELESS - WPS
PRODUCT INFO
WIRELESS - AUTO
IP ADDRESS
NETWORK INFO
WIRELESS - MANUAL
NETWORK SETTINGS
ADVANCED
SUBNET MASK
ROLES
GATEWAY
ENABLED
192.168.100.X
255.255.255.0
192.168.100.1
8.8.8.8
YES
DISABLED