Before Setting The Controls; Setting The Controls - KitchenAid YKGRT500 Use & Care Manual

U
sing the Self-Cleaning Cycle
Protective shield around ignitor
• Do not insert any object into the opening
of the protective shield that surrounds the
ignitor. Also, do not clean this area. Doing
either could result in product damage.
• Do not use your cooktop during the
Self-Cleaning cycle. Using your cooktop
will turn the cycle off.

Before setting the controls

•Make sure clock is set to correct
time of day.
•Make sure the oven door is
completely closed.

Setting the controls

To start cleaning immediately:
1. Press CLEAN.
1
A 3 ⁄ -hour Self-Cleaning cycle will be
2
set. (The first 3 hours are for cleaning,
the last 30 minutes are for cooling.)
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle other
1
than 3 ⁄ hours, press the desired
2
Number pads for the new time up to
1
4 ⁄ hours.
2
1
• Use 2
⁄ hours for light soil.
2
1 1
• Use 3
⁄ -4 ⁄ hours for moderate to
2 2
heavy soil.
46
PRESS
CLEAN
PRESS
4
0
0
YOU SEE
ON
HR MIN MIN SEC
TEMP PROBE TIMED DELAY
CONTROL CLEAN
O
STOP
F
START ? COOK TIME
1
(display shows 3 ⁄ -hour
2
cleaning cycle)
YOU SEE
ON
HR MIN MIN SEC
TEMP PROBE TIMED
DELAY
CONTROL CLEAN
O
STOP
F
START ? COOK TIME
(example shows 4-hour
cleaning cycle)
O
O