Before Setting The Controls - KitchenAid KERC507 Use And Care Manual

Using the Self-Cleaning Cycle
• The cooktop rear elements will not work
during the Self-Cleaning cycle on
Canadian models.
• Heating and cooling of porcelain on steel
may result in discoloring, loss of gloss,
hairline cracks and popping sounds.
Before seffing the confrols
• Make sure clock is set to correct
time of day.
• Make sure the oven door is
completely closed.
Selling the controls
To start cleaning immediately:
1. Press CLEAN.
A 31,_-hour S elf-Cleaningcyclewill be
set. (The first 3 hoursare for cleaning,
the last30 minutesare for cooling.)
PRESS
YOU SEE
(stop time display shows time
31/=hours later than time of day -
shown In start time display)
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle
other than 31/2hours, press the
desired Number pads for the new
time up to 41/2hours.
• Use 21/2hours for light soil.
• Use 31,_to 41/2hours for moderate
to heavy soil.
PRESS
YOU SEE
(example shows 4-hour cleaning
cycle with stop time now 4 hours
later than time of day)
3. Start oven.
NOTE: The door will lock right after you
press START.
PRESS YOU SEE
4. After the Self-Cleaning cycle
ends:
YOU SEE
53