Before Setting The Controls .L; Settingthe _:Ontro-T_._ - KitchenAid KERC507 Use And Care Manual

c/._sing the Self-Cleaning Cycle
• The cooktop rear elements will not work
during the Self-Cleaning cycle on
Canadian models.
• Heating and cooling of porcelain on steel
may result in discoloring, loss of gloss,
hairline cracks and popping sounds.
Before setting the controls
• Make sure clock is set to correct
time of day.
• Make sure the oven door is
completely closed.
Setting the controls
To start cleaning immediately:
1. Press CLEAN,
A 31_-hour Self-Cleaning cycle will be
set. (The first 3 hours are for cleaning,
the last 30 minutes are for cooling,)
PRESS YOU SEE
(stop time display shows time
31/=hours later than time of day -
shown in start time display)
2. Set
cleaning time (optional).
If you want a Self-Cleaning cycle
other than 31/2hours, press the
desired Number pads for the new
time up to 4V2 hours.
• Use 21,_hours for light soil.
• Use 31/2to 41,_hours for moderate
to heavy soil.
PRESS YOU SEE
(example shows 4-hour cleaning
cycle with stop time now 4 hours
later than time of day)
3. Start oven.
NOTE: The door will lock right after you
press START.
PRESS YOU SEE
4. After the Self-Cleaning cycle
ends:
YOU SEE
53