Figure 7-3 Port Filter Command Example; Figure 7-4 Port Filter Command Configuration Example - ZyXEL Communications ALC1024 User Manual

Commands with EEC
192.168.1.1 > bridge
192.168.1.1 bridge> portfilter
Port 1 (ethernet):
Port 2 (dsl1):
Port 3 (dsl2):
Port 4 (dsl3):
Port 5 (dsl4):
Port 6 (dsl5):
Port 7 (dsl6):
Port 8 (dsl7):
Port 9 (dsl8):
Port 10 (dsl9):
Port 11 (dsl10):
Port 12 (dsl11):
Port 13 (dsl12):
Port 14 (dsl13):
Port 15 (dsl14):
Port 16 (dsl15):
Port 17 (dsl16):
Port 18 (dsl17):
Port 19 (dsl18):
Port 20 (dsl19):
Port 21 (dsl20):
Port 22 (dsl21):
Port 23 (dsl22):
Port 24 (dsl23):
Port 25 (dsl24):
The above shows the current configuration of the port-based VLAN. It is the same as the default settings.
An example with an altered configuration is shown next.
192.168.1.1 > bridge
192.168.1.1 bridge> portfilter 2 1 3
192.168.1.1 bridge> portfilter 3 1 2
This example sets the allowed outgoing bridge ports of port 2 (DSL port 1) to port 1 (Ethernet port) and port 3
(DSL port 2). The allowed outgoing bridge ports of port 3 (DSL port 2) are set to port 1 (Ethernet port) and port 2
(DSL port1). This way, DSL ports 2 and 3 can communicate with each other and the Ethernet port. You can see
the effects of this example by using the following command:
7-8
all
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Figure 7-3 Port Filter Command Example

Figure 7-4 Port Filter Command Configuration Example

Bridge Commands