ALC1024 Overview
•
System status (link status, rates, statistics counters)
•
Temperatures, voltage reports and alarms.
Overheating Detection, Warning and Safegaurd
The ALM LED turns on when the line card's internal temperature is too high and turns off when the temperature
has returned to a normal level.
1.3
Default Settings
IEEE 802.1Q Tagged VLAN: Disabled
1.3.1
Default ADSL Settings
•
Encapsulation: RFC 1483
•
Multiplexing: LLC-based
•
VPI: 0
•
VCI: 33
•
Enable/Disable State: Disabled
•
Operational Mode: auto
1.3.2
Default Profile Settings
The following are the settings of the default profile.
•
Name: DEFVAL
•
Profile Status: Active
Downstream ADSL settings:
•
Target Signal/Noise Ratio: 6 db
•
Maximum Signal/Noise Ratio: 31 db
•
Minimum Signal/Noise Ratio: 0 db
•
Minimum Transmission Rate: 32 Kbps
•
Maximum Transmission Rate: 2048 Kbps
Upstream ADSL settings:
•
Target Signal/Noise Ratio: 6 db
•
Maximum Signal/Noise Ratio: 31 db
•
Minimum Signal/Noise Ratio: 0 db
•
Minimum Transmission Rate: 32 Kbps
1-2
ALC1024 Overview