Country Code - Platinum 22000 tl Installation And Operating Manual

PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL
The following screen is not displayed if only one inverter is started up.
Entry only at one inverter. All inverters connected to the network
are blocked.
With the number allocation completed, the inverter switches to
the Country Code screen.

Country code

In the menu Country code, the country where the inverter is operated
is set. Country-specific net conditions are set automatically in
dependence on the selected country.
The setting can be changed within 4 hours after the setting and the
start of the feeding into the mains supply. Without feeding, the period
is prolonged. After the period has expired, the setting cannot be
changed anymore.
Key
Select country.
OK Accept selection.
To select country code:
Select desired country.
Press OK key.
The inverter automatically transmits the country code setting to all
network participants.
Installation and operating manual: PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL
Version 05/2010
Mat. No. 737 576-AB
Function
Start Up
Note
Note
37