Locking Protective Cover; To Lock Open Protective Cover In Position; To Close Protective Cover Locked In Position - Platinum 22000 tl Installation And Operating Manual

PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL
Mounting
30
Installation and operating manual: PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL
Version 05/2010
Mat. No. 737 576-AB

Locking protective cover

For the free-standing device for outside installation, a protective
cover provides additional protection from rain, sunlight and theft.
1
Fig. 17 Free-standing device for outside installation
(1) Protective cover
(2) Protective grate
(3) Power Block protective housing TL Large
Make closed protective cover snap into place by pressing.

To lock open protective cover in position:

Open protective cover as far as it will go.
Push protective cover to the left.
Lower protective cover until protective cover snaps into place.

To close protective cover locked in position:

Lift protective cover as far as it will go.
Push protective cover to the right.
Close protective cover.
It is possible to lock the protective cover as a protection from
impermissible access.
2
3