Installation Of Optional Components; Second Tray Unit - Oki MB461 Maintenance Manual

Oki Data CONFIDENTIAL

3.5.3 Installation of Optional Components

This section explains how to install options. The following options are available:

• Second tray unit

(for MB461/MB461+LP/MB471/MB471w/MB491/MB491+/MB491+LP/ES4161 MFP/
ES4191 MFP/MPS4200mb/MPS4700mb)
Important Be sure to turn off the machine and unplug the AC cable and Ethernet
or USB cable before installing options. Installing options while the MFP is
turned on may damage the MFP and options.
3.5.3.1 Second Tray Unit
Installing a Second Tray Unit
IInstall an optional second tray unit (tray 2) when you want to increase the paper capacity of
the machine. After installation, you need to configure the printer driver settings.
Model Number : N22204A
Reference! For the specification of the second tray unit (Tray2), refer to "Loading
Paper" P . 3-9.
44871001TH Rev.6
Installation
Warning
At least two people are needed to lift the MFP safely.
(1) Hold down the power switch for about a second to turn off the power, and then
unplug the AC cable and the Ethernet or USB cable.
Reference! "Turning Off The machine" P . 3-15
(2) Lift the machine and align the three pins of the second tray unit with the holes at
the bottom of the machine.
(3) Place the machine on the second tray unit gently.
3. MFP INSTALLATION
3-16