Oki MB461 Maintenance Manual page 120

Oki Data CONFIDENTIAL
(7) Remove the PWR unit-ACDC Switch. (Refer to 4.2.4)
(8) Unlatch the claws (2 portions), and remove the Motor-FAN (60 x 25) from the Duct
Fan Power .
(9) Remove three screws (Silver)
44871001TH Rev.6
Craw
Air
to detach the Duct Fan Power .
(10) Remove eight screws (Silver) to detach the Plate Bracket (CU)
(11) Remove the screw (Silver, L=8mm)
(12) Remove four screws (Silver) , and remove the Plate Base (PWU)
along to the arrow in figure.
4.REPLACEMENT OF PARTS
.
, and remove core .
with to slide
Note to assemble
Clamp together the screw and
the FG-Film.
4-42