Oki Data CONFIDENTIAL
(8) Remove the screw (silver, L=8mm)
(9) Remove four screws (silver)
along to the arrow in figure.
44871001TH Rev.6
to detach the Core
.
, and remove the Plate Base (PWU)
(Reference)
The situation of the Mainbody
without the Plate Base (PWU).
(10) Remove two screws (Black)
MPT
.
with to slide
(11) Remove four screws (Silver)
(12) Remove the Gear-Reduction
(13) Remove the E-ring(RE3-SK)
(14) Remove the E-ring(RE3-SK)
Remove the Spring
Clutch
. This Spring
Hopping Clutch
(15) Remove the MPT Clutch
MB471w/MB491/MB491+/MB491+LP/ES4191 MFP/MPS4700mb/MPS4200mb)
(16) Installing is performed by the inverse procedure with removing.
Note!
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
and the screw (Silver)
, remove the Plate-Clutch-
, remove the Plate-Gear
.
.
, remove the Regist Clutch
, remove the Hopping Clutch
from the current Regist Clutch
can be used to the new Regist Clutch
.
and the Gear-MPT
. (MB451/MB451w/MB471/
4.REPLACEMENT OF PARTS
.
.
or the current Hopping
or the new
4-35