Service Bit Menu - Oki MB461 Maintenance Manual

Oki Data CONFIDENTIAL

6.2 Service Bit Menu

Additional Fax Setting menu
(When setup ServiceBit=ON, the following items will be displayed at Admin Setup→Fax
Setup)
# Item Settings
1 Tone For Enable
Echo (For Disable
Transmission)
2 Tone For Echo Enable
(For Reception) Disable
3 Attenuator 0~15 dB
4 MF Attenuator 0~15 dB
5 Pulse Make 33%
Ratio 39%
40%
6 Pulse Dial Type N
10-N
N+1
7 MF (Tone) 75, 85, 100 m
Duration seconds
44871001TH Rev.6
Description ODA
When an Item is Enable:
Disable
First DIS is ignored.
Echo Protection Tone is sent
with V.29.
Interval of DIS and DCS is
1000ms
When an Item is Disable:
First DIS is not ignored.
Echo Protection Tone is not
sent with V.29.
Interval of DIS and DCS is
75ms
When an Item is Enable : Disable
Interval of CED and DIS is
1000ms
When an Item is Disable :
Interval of CED and DIS is
075ms
Enter Attenuator. Depends on Country
Code
Enter MF (Tone) Attenuator. Depends on Country
Code
Sets the make rate of DP (10 Depends on Country
pps) during call. Code
It only shows, when ServiceBit
= ON and Tone/Pulse setting =
PULSE.
It only shows, when ServiceBit Depends on Country
= ON and Tone/Pulse setting = Code
PULSE.
Enter MF (Tone) Duration. Depends on Country
It only shows, when ServiceBit Code
= ON and Tone/Pulse setting =
TONE.
# Item
8 Calling Timer 1~255 second
(s)
OEL
Disable
Disable
Settings Description
Sets the call connection wait
time (TO timer).
6. MAINTENANCE MENUS
ODA OEL
Depends on Country
Code
6-10